R&S TSMA6B User Manual page 49

®
R&S TSMA6B
For Bluetooth
GUI ("Home" > "Overview").
To change the operation mode, navigate to "Configuration" > "System" > "Mode" and
select an operation mode.
1. In the web-GUI, verify the Bluetooth
Figure 6-7: Bluetooth settings
2. Navigate to "Configuration" > "Connectivity" > "Bluetooth" and verify the settings:
●
●
If necessary, change the settings via the buttons on the right.
3. On the remote device, activate Bluetooth and enable visibility.
Note: For devices with Android versions ≥ 5.0, there may be problems with visibil-
ity of the device.
Refer to
on page 119.
4. In the R&S TSMA6B web GUI, click "Refresh Device List".
The status text shows the following: "Refreshing device list in progress".
Wait until "No Error" is shown.
5. Click the arrow next to the "Refresh Device List" button and open the Bluetooth
adapter list box
6. Select the device to be paired and click "Connect".
7. On the remote device, confirm the Bluetooth pairing code.
User Manual 4901.4026.02 ─ 01
®
preparation, the device must be in the "PC Mode". Check it via the web
STATUS = On
Visibility = Visible
Chapter 9.13, "Bluetooth
Configuring the R&S TSMA6B
Pairing Bluetooth
®
settings on R&S TSMA6B.
®
device not detected by R&S
®
devices
TSMA6B",
49