Table of Contents
Advertisement
®
R&S
TSMA6B
5.9 Using external SSD option (R&S TSMA6B-BEB)
Correct connection between R&S TSMA6B and SSD
The option is pre-assembled and can only be ordered from the factory. For the USB
connection between the R&S TSMA6B and the SSD hard disc, check that only the
USB 3.0 port as shown in
Figure 5-8: R&S TSMA6B - removable disk option
1 = External enclosure with SSD hard disc
2 = USB connection between R&S TSMA6B and SSD hard disc
Removing external hard disk
To remove the external disk, proceed as follows.
1. Push the tab (1) backwards and hold this position.
2. Remove the hard disk from the mount in the direction of the arrow.
User Manual 4901.4026.02 ─ 01
Using external SSD option (R&S TSMA6B-BEB)
Figure 5-8
is used.
Preparing for use
33
Advertisement
Table of Contents
