Troubleshooting; Led Indicated Errors - R&S TSMA6B User Manual

Autonomous mobile network scanner
Hide thumbs Also See for TSMA6B:
Table of Contents

Advertisement

®
R&S
TSMA6B

9 Troubleshooting

For all troubleshooting procedures, connect keyboard, mouse and a monitor to the
R&S TSMA6B.
LED indicated
Evaluate selftest
Verify scanner link / recall device info using
R&S TSMA6B automatically switches off after power
Scanner is not found from software (R&S ROMES, R&S
Verify scanner connection LAN
No RF / GPS
No remote access via LAN
WLAN access point not detected by external PC, mobile or
Web GUI not accessible via
Web GUI locally not
Slow/Instable WLAN
Bluetooth
Contacting Customer

9.1 LED indicated errors

"Mode" LED blue blinking fast − Selftest Error
"State" LED red blinking (2 Hz) − Temperature Warning
"State" LED red continuous − Overheated Unit
"Meas" LED red blinking (2 Hz) − Application Error
"Pwr" LED off after startup − Power Error
User Manual 4901.4026.02 ─ 01
errors............................................................................................... 96
file................................................................................................ 97
data................................................................................................. 106
accessible.............................................................................115
connection........................................................................... 117
®
device not detected by R&S
Support...............................................................................121
Check the scanner connection (see
LAN
settings",
on page 105).
Evaluate the Selftestresult.txt (see
on page 97).
Check the ventilation openings and the operating temperature.
Switch off the device and let it cool down.
Switch off the device and let it cool down.
Check the ventilation openings and switch on the device. If the problem occurs
again, analyze the Selftestresult.txt (see
test
file",
on page 97).
Refer to the application note of the used software.
Contact R&S support.
TsmeDeviceManager.........................97
settings................................................................105
port............................................................................ 108
WLAN.......................................................................114
TSMA6B.................................................119
Chapter 9.6, "Verify scanner connection
Chapter 9.2, "Evaluate selftest
Troubleshooting
LED indicated errors
on......................................101
NESTOR).................... 102
tablet....................... 111
Chapter 9.2, "Evaluate self-
file",
96

Advertisement

Table of Contents
loading

This manual is also suitable for:

4900.8005.k20

Table of Contents