Web Gui Not Accessible Via Wlan Connection - R&S TSMA6 User Manual

®
R&S TSMA6
Check for the following entries:
●
●
If the adapters are not listed in the view, we recommend a recovery of the factory
backup (see
support.

11.11 Web GUI not accessible via WLAN connection

If the R&S TSMA6 web GUI is not accessible, perform the following steps to solve the
problem.
1. Check if the WLAN AP is activated.
●
●
2. For remote connection via WLAN, check if the TSMA6 WLAN is visible via your
smartphone/tablet.
●
●
3. Check if your smartphone/tablet is connected to the TSMA6 WLAN AP.
●
●
4. Open the browser on the handheld device and enter the following URL:
http://192.168.137.1.
If the web browser cannot load the web page, continue with
User Manual 4900.8057.02 ─ 11
"TSMA6 WLAN AP"
"TSMA6 WLAN Connection"
Chapter 10, "User backup and
If "Mode" LED = blue, continue with
If Mode LED != blue, continue with
detected by external PC, mobile or
If it is visible, continue with
If it is not visible, continue with
ted by external PC, mobile or
If the connection is established, continue with
If the connection is not established, try to reconnect. If it fails again, contact
R&S support.

Web GUI not accessible via WLAN connection

restore", on page 122) or contact R&S
step 2.
Chapter 11.10, "WLAN access point not
tablet", on page 140.
step 3.
Chapter 11.10, "WLAN access point not detec-
tablet", on page 140.
step
Troubleshooting
4.
step 5.
142