®
R&S
TSMA6B
The mainboard flash is indicated like following:
●
●
●
2. After the flash of the mainboard firmware, the device reboots.
8.4 Software update - details
For software installations (NESTOR, SmartOne, ViCom) and the TsmeTool installation,
use only the TSMA6B-specific setup files
(TSMA6B-<AppName>-|<version>-setup.exe).
Following software components are available for installation on the R&S TSMA6B.
●
R&S TsmeTools
●
Remote ViCom Server
●
R&S NESTOR
●
R&S ROMES
●
SwissQual QualiPoc
●
SmartONE
Before starting with software installation, check the latest TSMA6B firmware release
notes under https://www.rohde-schwarz.com/firmware/tsmx/.
8.4.1 Remote ViCom Server software
The Remote ViCom server (rViCom) is an additional software package for the R&S
TSMA6B. The latest version of this package is pre-installed on any shipped R&S
TSMA6B.
An upgrade of the Remote ViCom package is only recommended when operating the
R&S TSMA6B in "rViCom Server" mode.
The update of the Remote ViCom package installation could be neglected for other
modes of operation (NESTOR, ROMES, QualiPoc).
User Manual 4901.4026.02 ─ 01
Meas LED = green / red
Mode LED = blue
Fans are switched to full speed
Update and restore
Software update - details
72