®
R&S
TSMA6B
9.13 Bluetooth
To detect/connect a Bluetooth
in the web GUI.
If a mobile or tablet is not detected by the R&S TSMA6B as Bluetooth
problem is probably the bluetooth visibility of the mobile (or tablet). This problem
occurs when a new device is connected to the R&S TSMA6B for the first time.
The visibility of an Android device with firmware version ≥5.0 cannot be changed. The
mobile (tablet) is only visible to other devices when the "Bluetooth Properties" window
is open.
If you are controlling the R&S TSMA6B web GUI with the mobile and also want to cou-
ple the devices via Bluetooth
1. On the R&S TSMA6B, enable Bluetooth
2. On the mobile device (mobile or tablet), open the Bluetooth properties. The R&S
TSMA6B should be listed. Choose the entry for your R&S TSMA6B.
User Manual 4901.4026.02 ─ 01
Bluetooth
®
device not detected by R&S TSMA6B
®
device with R&S TSMA6B, click "Refresh Device List"
®
, then you have to perform following steps.
®
device not detected by R&S TSMA6B
®
and make it visible (see
Troubleshooting
®
device, the
step
1).
119