R&S TSMA6B User Manual page 94

®
R&S TSMA6B
To apply an image to a R&S TSMA6B, proceed as follows:
1. Boot the R&S TSMA6B image stick from the target device (see
"Boot from the R&S TSMA6B Image
2. In the main menu, press "Apply Image".
The apply process starts automatically. The image files from the R&S TSMA6B
master device are transferred to the R&S TSMA6B target device and removed from
the R&S TSMA6B image stick.
3. After the apply process has finished, the message "Operation successfully done."
appears.
User Manual 4901.4026.02 ─ 01
Usage of the R&S TSMA6B Image Stick
Stick", on page 91).
Update and restore
Chapter 8.8.2,
94