®
R&S
TSMA6B
3. Copy the setup file (firmware TSMAx-Setup-<Version>.exe or software) onto a
USB memory stick.
4. Open the R&S TSMAx web GUI (see
GUI",
5. Make sure, that the R&S TSMA6B is in "PC Mode".
6. In the R&S TSMAx web GUI, navigate to the menu "Update" and select the instal-
lation file for one of the following.
●
●
●
7. Select the appropriate setup file (e.g. TSMAx-Setup-<Version>.exe for firm-
ware update) and press "Update Firmware" next to the select box.
The "Update" buttons are only active, if a valid setup file is available on the USB
stick.
8. A confirmation dialog appears. Confirm with "OK" to start the update.
User Manual 4901.4026.02 ─ 01
on page 60).
Firmware
TsmeTools
Software (NESTOR, SmartOne, ViCom)
Updating firmware/software/tools - general instructions
Chapter 8.2.1, "Calling R&S TSMA6B web
Update and restore
69