Local Execution Of The Setup File - R&S TSMA6B User Manual

®
R&S TSMA6B
4. Reload the web GUI after changing the mode, and ensure that the "Mode of Oper-
ation" is "PC Mode".
The R&S TSMA6B is ready for firmware update / software installation.

8.2.3 Local execution of the setup file

1. Connect mouse and keyboard to USB ports and a monitor to the HDMI port. The
setup file must be available on the R&S TSMA6B or on a USB stick.
2. Switch on the R&S TSMA6B via the power button.
3. Copy the setup file (firmware TSMAx-Setup-<Version>.exe or software) into a
temporary directory on the local disk of the R&S TSMA6B.
4. Check that R&S TSMA6B is in "PC Mode", see
operation",
5. Open the Windows Explorer and execute the setup file
TSMAx-Setup-<Version>.exe.
6. The "R&S Software Distributor" comes up. Select "Local Installation" and press
"Next >".
User Manual 4901.4026.02 ─ 01
Updating firmware/software/tools - general instructions
on page 60.
Update and restore
Chapter 8.2.2, "Checking mode of
62