Table of Contents
Advertisement
®
R&S
TSMA6B
9. The firmware/software installation starts. The status text in the web GUI displays
"Installation in progress...".
The Mode LED starts blinking blue.
Note: Do not switch off or unplug from power while running firmware/software
update.
10. When the installation of all firmware/software packages has finished, the R&S
TSMA6B reboots.
After reboot the firmware is running a selftest (Mode LED is blinking green).
11. Open the web GUI. After a while, the status text in the web GUI changes to
No error.
The reboot is finished when the Mode LED changes into steady blue (WLAN AP
On) or green (WLAN AP Off) color.
12. The "Overview" page in the web GUI needs to display the installed firmware/soft-
ware version.
User Manual 4901.4026.02 ─ 01
Updating firmware/software/tools - general instructions
Update and restore
70
Advertisement
Table of Contents
