Using A Remote Desktop Connection - R&S TSMA6B User Manual

®
R&S TSMA6B
2. Power on the R&S TSMA6B.
3. Press the Internet Explorer icon in the Windows task bar.
The R&S TSMA6B web GUI opens automatically. If not, type the following URL:
http://localhost

6.2.2 Using a remote desktop connection

To establish a remote desktop connection with a Windows PC (Win10 is recommen-
ded), the following steps have to be perfomed.
1. Establish a WLAN/LAN connection between the R&S TSMA6B and the remote PC
(see
2. On the keyboard, press [Win-Logo + R].
The command window opens.
3. Enter mstsc.exe.
The "Remote Desktop Connection" window opens.
4. In the "Remote Desktop Connection" window, click "Show Options".
5. In the "General" tab, enter following parameters:
●
●
User Manual 4901.4026.02 ─ 01
Chapter 6.2.1, "Using the R&S TSMA6B web
Computer: The input depends on selected connection type and is as follows.
– WLAN: 192.168.137.1
– LAN: IP address of the R&S TSMA6B
NOTE:
If you connect the R&S TSMA6B LAN interface with a PC via LAN cable,
the IP addresses are negotiated automatically by default. The IP address of
the R&S TSMA6B can be read from the local web GUI
"Using the R&S TSMA6B web
User name: instrument
Configuring the R&S TSMA6B
Accessing the R&S TSMA6B
GUI", on page 35).
GUI", on page 35).
(seeChapter 6.2.1,
37