Table of Contents
Advertisement
®
R&S
TSMA6B
15 = Status LEDs - Scanner Pwr / State
16 = GPS Ant. connector (SMA) - GPS antenna input
17 = RF In connector
WLAN/Bluetooth ON/OFF
Switches WLAN and Bluetooth on and off.
SCAN port (RJ45 connector)
The SCAN port provides a high-speed 1 Gbit Ethernet interface with an RJ 45 connec-
tor. It is used to connect the R&S TSMA6B to a separate R&S TSME6 as a second
scanner. It can be used for MIMO scenarios and for increasing bandwidth and mea-
surement rate.
LAN port - remote control (RJ45 connector)
The LAN port provides a high-speed 1 Gbit Ethernet interface with an RJ 45 connector.
It is used to connect the R&S TSMA6B to a host PC.
The LAN interface can be used for Remote Control / Remote Desktop Connections.
Alternatively, it can also be used for distributed applications of R&S NESTOR.
The LEDs on the LAN port indicate the status of the connection to the host PC. LED 1
(yellow, link status) is on the left side of the port, LED 2 (green, activity status) is on the
right.
CPU ON/OFF
Switches between scanner mode (scanner only) and standard mode (CPU and scan-
ner) For details, see
AUX connector
The AUX connector has two functions.
●
Input/output: Synchronization with up to 4 connected R&S TSME6 (requires sync
cable R&S TSME6-ZC2, R&S no. 4900.1800.02 or R&S TSME6-ZC4, R&S no.
4900.1817.02)
●
Input: Synchronization of R&S TSMA6B with an external 10 MHz reference
(requires dedicated sync cable)
USB 3.0 (5x)
The USB 3.0 ports can be used for connecting external storage devices, data sticks
and test mobile phones.
Power limit: max. 900 mA / port
Overall USB current (USB-C, USB 3.0 and USB 2.0): max. 3 A
User Manual 4901.4026.02 ─ 01
Chapter 6.3.1.6, "Scanner
Instrument tour
Rear panel view
mode",
on page 46.
13
Advertisement
Table of Contents
