Web Gui Not Accessible Via Wlan - R&S TSMA6 Series User Manual

®
R&S TSMA6

8.10 Web GUI not Accessible via WLAN

If the R&S TSMA6 web GUI is not accessible, perform the following steps to solve the
problem.
1. Check if the WLAN AP is activated.
●
●
2. For remote connection via WLAN, check if the TSMA6 WLAN is visible via your
smartphone/tablet.
●
●
3. Check if your smartphone/tablet is connected to the TSMA6 WLAN AP.
●
●
4. Open the browser on the handheld device and enter the following URL:
http://192.168.137.1.
User Manual 4900.8057.02 ─ 06
If "Mode" LED = blue, continue with
If Mode LED != blue, continue with
Detected By External PC, Mobile Or
If it is visible, continue with
If it is not visible, continue with
By External PC, Mobile Or
If the connection is established, continue with
If the connection is not established, try to reconnect. If it fails again, contact
R&S support.

Web GUI not Accessible via WLAN

step 2.
Chapter 8.9, "WLAN Access Point Not
Tablet", on page 108.
step 3.
Chapter 8.9, "WLAN Access Point Not Detected
Tablet", on page 108.
step
Troubleshooting
4.
111