Web Gui Locally Not Accessible - R&S TSMA6B User Manual

®
R&S TSMA6B
If the web browser cannot load the web page, continue with
5. Check the IP address of the WLAN connection on your handheld device. It must be
in the subnet 192.168.137.xxx.
●
●

9.11 Web GUI locally not accessible

Open the web GUI locally. Start the Internet Explorer and enter the following URL to
open the R&S TSMA6B web GUI .
http://localhost
1. Check the URL in the browser dialog. Following URL must be displayed:
http://localhost/TSMA/Html/overview.php
●
●
User Manual 4901.4026.02 ─ 01
If the subnet is correct, continue with
accessible", on page 115.
If the subnet is not correct, try to reconnect. If it fails again, contact R&S sup-
port.
If the URL is not correct, enter the correct URL and reload the URL. If it fails
again, reinstall the firmware
general instructions", on page 60.
If the URL is correct and the following error status is displayed, continue with
step 2.
Web GUI locally not accessible
Chapter 9.11, "Web GUI locally not
Chapter 8.2, "Updating firmware/software/tools -
Troubleshooting
step 5.
115