®
R&S
TSMA6B
Figure 6-6: Switch to scanner mode
1 = CPU switch
2 = LAN port
2. Switch off the R&S TSMA6B.
3. Then switch the R&S TSMA6B on again.
The R&S TSMA6B is in scanner mode and can be accessed via the LAN port (2)
with the IP address 192.168.0.2
The Status LED "Mode" (see
blue color.
Standard Mode
To use the R&S TSMA6B in standard mode, proceed as follows.
1. Use a pointed object to push the CPU switch (1) to position I.
2. After a power cycle, the R&S TSMA6B starts in normal mode.
User Manual 4901.4026.02 ─ 01
Figure 3-2
- 9) indicates the scanner mode by a blinking
Configuring the R&S TSMA6B
Selecting measurement mode
47