Table of Contents
Advertisement
®
R&S
TSMA6B
●
●
●
4. Check the scanner [State] LED.
●
●
5. The scanner module may be blocked due to a program in Windows "Startup".
To open the "Startup" folder, press Windows + R to open the "Run" dialog box, type
in shell:startup and then press "OK".
An explorer window right to the "Startup" folder opens.
●
●
6. Start the "TSME Device Manager" via the Windows "Start" menu.
"Start > All Programs > TsmeTools > TsmeDeviceManager"
User Manual 4901.4026.02 ─ 01
Scanner is not found from software (R&S ROMES, R&S NESTOR)
If the "Mode of Operation" != "PC Mode", switch mode to "PC Mode". Restart
the R&S TSMA6B via web GUI and check the LEDs, see
If the IP address of the "SCAN Port (int)" = "192.168.0.1", continue with
If the IP address of the "SCAN Port (int)" != "192.168.0.1", contact R&S sup-
port.
If it is off, continue with
If it is on, continue with
Remove any program entry which could interface the scanner module, restart
the R&S TSMA6B via the web GUI and repeat with
If there is no entry, contact R&S support.
step
6.
step
5.
Troubleshooting
step
1.
step
step
3.
4.
104
Advertisement
Table of Contents
