Table of Contents
Advertisement
®
R&S
TSMA6B
Network Key ← WLAN Adapter
Enter the network key for the selected WLAN network.
TCP/IP Mode (WLAN Client) ← WLAN Adapter
The IP address can be assigned automatically via DHCP ("DHCP") or manually as
fixed IP address ("Static").
IP Address (WLAN Client) ← WLAN Adapter
Specify the IP address of the R&S TSMA6B
Subnet Mask (WLAN Client) ← WLAN Adapter
Specify the subnet mask for the R&S TSMA6B
Default Gateway (WLAN Client) ← WLAN Adapter
Specify the default gateway.
DNS Servers(s) (WLAN Client) ← WLAN Adapter
Specify the DNS server. It is possible to specify a primary and a secondary DNS
server.
A.2.2.3
WLAN AP
In the "WLAN AP" tab, the WLAN access point settings can be configured.
Changing SSID and network key is only possible with local access or LAN access to
the web GUI.
WLAN Access
WLAN Access Point
Specify the configuration details for the WLAN access point.
Status (WLAN AP) ← WLAN Access Point
The WLAN access point can be switched on or off. When WLAN is switched to "Off", it
can be selected, if this setting is permanent (resists restart) or only for the current ses-
sion (WLAN AP On after restart).
On
Off
SSID ← WLAN Access Point
Enter the SSID.
Network Key ← WLAN Access Point
Enter the network key for the specified SSID and press "Submit".
User Manual 4901.4026.02 ─ 01
Point.................................................................................................... 130
└
Status (WLAN
AP)........................................................................................ 130
└ SSID..............................................................................................................130
└
Network
Key..................................................................................................130
The WLAN AP remains switched off after a restart.
The WLAN AP is switched on again after a power cycle.
Note: The WLAN switch must be set to "On".
Usage of the Web GUI
Configuration
130
Advertisement
Table of Contents
