®
R&S
TSMA6B
Figure 6-5: Scanner ready
For more details about the QualiPoc configuration and usage, refer to the user docu-
mentation for QualiPoc
6.3.1.4
NESTOR and NESTOR probe mode
The NESTOR mode is only displayed if the NESTOR setup has been executed (see
Chapter 8.4.2, "R&S NESTOR
General
●
NESTOR mode
The NESTOR UI engine and the NESTOR measurement engine are hosted on the
R&S TSMA6B.
●
NESTOR probe mode
The R&S TSMA6B hosts only the NESTOR measurement engine. The NESTOR
UI engine is hosted on a remote PC connected via LAN/WLAN with the R&S
TSMA6B.
Prerequisites
●
For NESTOR and NESTOR probe mode:
–
●
For NESTOR mode only:
–
●
For NESTOR probe mode only:
–
–
User Manual 4901.4026.02 ─ 01
®
.
NESTOR option licenses either installed on the internal SD card or connected
as an external USB dongle
NESTOR workspace file imported (see
on page 48
WLAN / LAN connection with the NESTOR host (see
the R&S
TSMA6B",
on page 35)
PC with NESTOR master installation to check the measurement on the R&S
TSMA6B
software",
on page 76) .
"Import NESTOR workspace file"
Configuring the R&S TSMA6B
Selecting measurement mode
Chapter 6.2, "Accessing
43