R&S TSMA6B User Manual page 81

®
R&S TSMA6B
Initial starting of SmartONE Expert (R&S ROMES)
1. Install the option key (see
(ROMES)
2. If used, connect the hardlock to a USB port.
3. Start the web GUI.
4. Navigate to "Configuration" > "System" > "Mode".
5. As "Mode of Operation", select "SmartONE Expert".
Make sure, that "Autostart" is deselected and no workspace is selected.
6. Press "Submit".
After starting R&S ROMES, configure the following settings.
1. In the "Romes Technology Selector", select the technologies to be supported by
your ROMES installation.
User Manual 4901.4026.02 ─ 01
Chapter 8.6.3, "Installation of SmartONE Expert
options", on page 87).
Update and restore
Software update - details
81