Table of Contents
Advertisement
®
R&S
TSMA6B
NESTOR mode
To use the R&S TSMA6B in NESTOR mode, the following steps must be performed.
1. In the web-GUI, set the "Mode of Operation" to "NESTOR" and press "Submit".
2. Select a NESTOR workspace file (see
on page 48).
3. Select a scenario ("Monitoring" or "Cellular Network Analysis").
4. Press "Submit".
The R&S TSMA6B is switched into "NESTOR" mode. In the status bar, the entry is
"Changing mode of operation in progress...".
The mode switch is finished when the status bar indicates "No error". The scanner
state LED starts blinking rapidly.
User Manual 4901.4026.02 ─ 01
Configuring the R&S TSMA6B
Selecting measurement mode
"Import NESTOR workspace file"
44
Advertisement
Table of Contents
