Table of Contents
Advertisement
®
R&S
QPS Walk2000
4.3 Gate power button
The gate power button turns the measuring electronics on and off.
The power button has the following states:
●
Illuminated (green): Measuring electronics are on.
A long press of the button turns off the electronics.
●
Unilluminated: Measuring electronics are off.
A short press of the button turns on the electronics.
4.4 GUI power button
The GUI power button turns the computer that runs the user interface on and off. The
computer that runs the user interface is integrated in the R&S QPS Walk2000.
Note that you have to turn on the touchscreen that displays the graphical user interface
separately.
The GUI power button has the following states:
●
Illuminated (blue): GUI computer is running.
●
Unilluminated: GUI computer is off.
4.5 Optical fiber connector (J1)
The optical fiber connector provides the data interface to the server.
4.6 HDMI connector (J2)
The HDMI connector provides the interface to the graphical user interface (touch-
screen).
4.7 USB connector (J3)
The USB connector provides the interface to the graphical user interface (touch-
screen).
4.8 LAN port (J4)
The LAN port is reserved for later use.
Getting Started 1179.5782.02 ─ 03
Scanner tour
LAN port (J4)
17
Advertisement
Table of Contents
