®
R&S
TSMA6B
6.3.1.1
PC mode
The "PC Mode" is the standard mode for installation of software and for the interactive
operation of the R&S TSMA6B. In this mode, no software application (NESTOR,
ROMES, QualiPoc) is started in the background.
6.3.1.2
Remote ViCom server mode
This mode starts the Remote ViCom server on the R&S TSMA6B. Measurement con-
figuration and data collection are controlled from a remote connected handheld device.
A Remote ViCom client application needs to be installed on the handheld device for
this purpose.
The connection between the Remote ViCom server on the R&S TSMA6B and the cli-
ent application (Remote ViCom client) on the handheld device can be realized via
Bluetooth
The selection of the wireless interface type depends on the measurement task.
The WLAN connection allows a data throughput, which is about 10 times higher com-
pared to Bluetooth
The Bluetooth
Prerequisites
●
Bluetooth connection only
See
●
WLAN connection only
Connect the tablet/smartphone with the R&S TSMA6B WLAN AP. See
"Connecting with R&S TSMA6B WLAN access
Measurement with the rViCom sample App
To run measurements, the requirements for operating the rViCom sample App have to
be fulfilled, see
1. Activate the rViCom server mode (see
mode",
2. Start one of the following applications.
a) Start the OEM rViCom client application on the mobile device.
b) Start the rViCom sample App on the mobile device.
User Manual 4901.4026.02 ─ 01
®
or WLAN.
®
.
®
connection is less influenced by radio interference.
Chapter 6.5, "Pairing Bluetooth
Chapter B, "Introduction to Remote ViCom Sample
on page 39).
For more details, see
Chapter B.3,
Configuring the R&S TSMA6B
Selecting measurement mode
®
devices",
on page 48.
point",
on page 28.
Chapter 6.3, "Selecting measurement
"Usage",
on page 139.
Chapter 5.5,
App",
on page 138.
40