Qualipoc Mode - R&S TSMA6B User Manual

®
R&S TSMA6B
6.3.1.3

QualiPoc mode

The QualiPoc mode selector is only displayed if the R&S SmartONE software is instal-
led (see
Poc)",
Prerequisites
●
The appropriate scanner license must be installed on the QualiPoc
device. If you do not have the correct license, contact the R&S service.
●
On the R&S TSMA6B, Bluetooth
To use the R&S TSMA6B with QualiPoc
1. Turn on the R&S TSMA6B scanner.
2. In the web-GUI, set the "Mode of Operation" to "QualiPoc" and press "Submit".
3. On the handheld device, start the QualiPoc
4. Touch the main menu
5. Touch the plus sign (+) at the top of the screen and touch "NCM".
Figure 6-1: Add NCM
QualiPoc
Note: The NCM provides the Bluetooth
6. Touch "Scan" at the top of the screen and wait until the scanning process stops.
User Manual 4901.4026.02 ─ 01
Chapter 8.4.3, "R&S SmartONE setup (SmartBenchmarker, ROMES, Quali-
on page 79).
, and then touch "Device manager"
®
displays "NCM" under "Devices".
Configuring the R&S TSMA6B
Selecting measurement mode
®
must be activated and visible (see
®
, the following steps must be performed.
®
application.
®
connection to the scanner.
®
handheld
Figure 6-7).
41