Removable Ssd Option (R&S Tsma6B-Beb) - R&S TSMA6B User Manual

®
R&S TSMA6B
The integrated multi-GNSS (GPS / BeiDou / Galileo / GLONASS) receiver allows to
use three satellite systems in parallel. This offers an accuracy improvement of 30 % to
50 % by using a second constellation of satellites.
Following combinations are allowed:
●
GPS only
●
GPS / GLONASS / Galileo
●
GPS / BeiDou
The R&S TSMA6B can perform dead reckoning in tunnels to provide position informa-
tion even if no satellites are available. The dead reckoning is performed in the device
itself by built-in electronic gyroscopes.
For enabling untethered dead reckoning, see
reckoning",
RF IN connector
The RF IN connector is the RF input of the R&S TSMA6B. The multi-band RF paddle
antenna (700 MHz to 2.6 GHz), which is included in the shipment of R&S TSMA6B or
any custom RF source is connected to this SMA connector. The maximum input power
is +20 dBm/10 V DC.
Risk of instrument damage
Do not overload the maximum allowed input of +20 dBm.
Non-compliance destroys the input mixer.
3.3 Removable SSD option (R&S TSMA6B-BEB)
The R&S TSMA6B can be ordered with a removable SSD option. With this option the
system disk (SSD) is mounted in an external SSD enclosure and connected via the
USB3.1 port of the R&S TSMA6B. These disk incorporates operating system and user
data. There is no internal disk assembled / fitted in the R&S TSMA6B.
User Manual 4901.4026.02 ─ 01
on page 32.
Removable SSD option (R&S TSMA6B-BEB)
Chapter 5.8, "Calibrating GPS for dead
Instrument tour
15