®
R&S
TSMA6B
●
Mode..................................................................................................................... 127
●
Power.................................................................................................................... 127
●
Speaker.................................................................................................................128
●
RF
●
Password.............................................................................................................. 128
A.2.1.1
Mode
The "Mode" tab displays information about the operation mode and the state of the cur-
rent measurement.
Mode of
Current
Mode of Operation
With the "Mode of Operation", the autostart sequence of the R&S TSMA6B can be
adjusted to change the usage of the R&S TSMA6B.
Current Measurement
Displays information about the state of the current measurement.
A.2.1.2
Power
The "Power" tab displays all settings related to the power on/power off scenarios.
Startup
Delayed System
Shutdown
Startup Settings
Configures different startup sequences.
Auto Power ON ← Startup Settings
The R&S TSMA6B starts automatically when power is applied at the DC IN connector
of the R&S TSMA6B or at the DC IN connector of a connected R&S TSMA6B Battery
Pack.
Remember Last State ← Startup Settings
The R&S TSMA6B remembers the last state before the DC power was removed.
When DC power is applied again at the DC IN connector of the R&S TSMA6B or at the
DC IN connector of a connected R&S TSMA6B battery pack, the power state before
power removal is recovered.
Delayed System Start
Configure the power on delay (in min) and press "Activate".
User Manual 4901.4026.02 ─ 01
Band................................................................................................................ 128
Operation...................................................................................................... 127
Measurement................................................................................................. 127
Settings...........................................................................................................127
└
Auto Power
ON............................................................................................. 127
└
Remember Last
State................................................................................... 127
Start................................................................................................. 127
Settings...................................................................................................... 128
└
Auto Power
Off..............................................................................................128
Usage of the Web GUI
Configuration
127