Table of Contents
Advertisement
®
R&S
TSMA6B
Provides a spectrum analysis by selecting the frequency range
The RAN technology for which a scan should be performed has to be selected. The
selection of the technologies is described in the following chapters.
B.3.2 GSM RSSI Scan
B.3.2.1
GSM Preferences
To start a GSM RSSI scan, the following steps must be performed.
1. Choose a frequency band.
The channels are set automatically to the maximum range available for the
selected band.
Figure B-5: Setting the GSM Preferences
2. If necessary, change the channels manually according to your needs. The input in
the "Channels" field can be done like following.
a) Add a single number for one specific channel.
b) Add a range of channels.
c) Add more than one single number separated by semicolon.
3. Click "Start scan" to start the scan.
B.3.2.2
GSM Scan Results
The GSM scan result graph displays one column for each channel selected. The height
of a column represents the RSSI value (in dBm).
User Manual 4901.4026.02 ─ 01
Example: 7
Example: 1-124
Example: 2;4;7;76
Introduction to Remote ViCom Sample App
Usage
141
Advertisement
Table of Contents
