Table of Contents
Advertisement
®
R&S
TSMA6B
6.4 Importing workspace files (NESTOR, ROMES)
Import NESTOR workspace file
1. Start the R&S TSMA6B web GUI from the host PC (see
R&S TSMA6B web
2. Navigate to "Configuration" > "System" > "Mode" and set measurement mode to
"NESTOR Probe".
3. Press "Submit" and wait until the device is in "NESTOR Probe" mode. (In the sta-
tus bar, the entry is "No error".)
4. Navigate to "File Transfer" and press the "Browse..." button in the "Upload" section.
5. Search on the host PC for the NESTOR workspace file to be imported and confirm
the dialog with "Open".
6. Press "Upload".
The file is copied to the NESTOR workspace directory (default:
D:\Users\Instrument\Documents\NESTOR\FavoriteWorkspaces).
This path can be configured in the "File Transfer" menu.
7. Navigate back to "Configuration" > "System" > "Mode".
8. The imported workspace file is selectable from the list box in the "Mode" tab.
Import of ROMES workspace file
Importing of the R&S ROMES workspace file is an additional requirement for operating
in the "ROMES" mode.
1. Start the R&S TSMA6B web GUI (see
web
2. Navigate to "File Transfer" menu and go to section "Upload File to TSMA".
3. Press the "Browse" button, select the desired ROMES workspace file on the
remote PC and click "Upload File".
4. The file is copied by default in the directory
C:\ProgramData\Rohde&Schwarz\My ROMES\Workspace.
Note: The target directory for file upload depends on the selected mode. The men-
tioned directory is only valid in ROMES mode.
6.5 Pairing Bluetooth
To pair the R&S TSMA6B with a remote device, the following steps must be performed.
User Manual 4901.4026.02 ─ 01
GUI",
on page 35).
GUI",
on page 35).
®
devices
Configuring the R&S TSMA6B
Pairing Bluetooth
Chapter 6.2.1, "Using the
Chapter 6.2.1, "Using the R&S TSMA6B
®
devices
48
Advertisement
Table of Contents
