Apply An Image To A R&S Tsma6B - R&S TSMA6B User Manual

®
R&S TSMA6B
4. Press "OK".
5. Remove the R&S TSMA6B image stick.
The R&S TSMA6B image stick now contains the image files (/Device/Images).
6. Press "Reboot".
The R&S TSMA6B reboots normally in the previously selected mode of operation.
The image files, which are available on the R&S TSMA6B image stick in the directory
(/Device/Images can be saved manually on a PC. So, the image files can be used
to be applied on more than one device.
8.8.4 Apply an Image to a R&S TSMA6B
To apply an image to a R&S TSMA6B, the following files must be available in the direc-
tory Device/Images on the R&S TSMA6B image stick.
●
BACKUP.wim
●
Data.wim
●
RECOVERY.wim
●
SYSTEM.wim
These files can be copied manually from a PC to the image stick or are the result of
capturing an image (see
on page 91).
User Manual 4901.4026.02 ─ 01
Usage of the R&S TSMA6B Image Stick
Chapter 8.8.3, "Capture an Image from a R&S
Update and restore
TSMA6B",
93