®
R&S
TSMA6B
3. Install the Sample App on the Android device.
B.3 Usage
B.3.1 Connection Establishment
Start the Sample App on the Android device.
B.3.1.1
Connection Type Selection
To connect to the R&S TSMA6B Remote rViCom Server, it is either possible to use a
WLAN connection or a Bluetooth connection.
The selection of the connection type depends on the measurement task (see
ter B.3.1, "Connection
Figure B-1: Connection Type Selection
B.3.1.2
Server Discovery
1. Choose a connection type, as described in
Selection",
2. The server discovery starts and the following dialog appears.
Figure B-2: Active Server Discovery
User Manual 4901.4026.02 ─ 01
Establishment",
on page 139.
Introduction to Remote ViCom Sample App
on page 139).
Chapter B.3.1.1, "Connection Type
Usage
Chap-
139