Boot From The R&S Tsma6B Image Stick; Capture An Image From A R&S Tsma6B - R&S TSMA6B User Manual

®
R&S TSMA6B
4. Press "Create RecoveryStick".
In the main directory of the image stick, following directories and files are created auto-
matically:
●
/Boot
●
/Device
●
/EFI
●
/sources
●
bootmgr
●
bootmgr.efi
When the creation of the image stick has finished, you can boot the R&S TSMA6B
from this stick.
8.8.2 Boot from the R&S TSMA6B Image Stick
To boot from the R&S TSMA6B image stick, proceed as follows.
1. Connect mouse, keyboard and monitor to the R&S TSMA6B.
2. Insert the created R&S TSMA6B image stick (see
TSMA6B Image
R&S TSMA6B.
3. Power on the R&S TSMA6B.
4. During boot up, press [F10] to enter the boot menu.
5. Select the R&S TSMA6B image stick from the list of boot devices and press
<Enter>.
The Windows PE environment starts.
8.8.3 Capture an Image from a R&S TSMA6B
To capture an image from a R&S TSMA6B, proceed as follows:
User Manual 4901.4026.02 ─ 01
Stick", on page 90) into a free USB 3.0 port
Update and restore
Usage of the R&S TSMA6B Image Stick
Chapter 8.8.1, "Create a R&S
(Figure 3-2) on the
91