Table of Contents
Advertisement
®
R&S
TSMA6B
Status
Displays the measurement duration and the measurement rate. The status button dis-
plays the following colored states.
●
Green
The measurement is running and measurement data are received.
●
Yellow
The measurement is running but no measurement data are received.
●
Red
The measurement was stopped.
► To stop the scan, use "Stop scan" in the menu inflator in the top right corner.
B.3.4 LTE Top Signal Scan
B.3.4.1
LTE Top Signal Preferences
To start an LTE scan, the following steps must be performed.
1. Choose a frequency band.
The minimum EARFCN of this band is set automatically.
Figure B-9: Setting the LTE Preferences
2. If necessary, change the EARFCN according to your needs.
Note: Due to processing issues, it is not possible to select more than one
EARFCN.
3. Click "Start scan" to start the scan.
In the menu inflator on top of the right corner, templates for existing preferences
(Munich and surrounding areas) can be selected.
User Manual 4901.4026.02 ─ 01
Introduction to Remote ViCom Sample App
Usage
144
Advertisement
Table of Contents
