Configuring The R&S Tsma6; Accessing The R&S Tsma6; Start The R&S Tsma6 Web Gui - R&S TSMA6 Getting Started

®
R&S TSMA6
6 Configuring the R&S TSMA6
Network environment
Before connecting the product to a local area network (LAN), consider the follow-
ing:
● Install the latest firmware to reduce security risks.
● For internet or remote access, use secured connections if applicable.
● Ensure that the network settings comply with the security policies of your com-
pany. Contact your local system administrator or IT department before con-
necting your product to your company LAN.
● When connected to the LAN, the product may potentially be accessed from
the internet, which may be a security risk. For example, attackers might mis-
use or damage the product.
6.1 Accessing the R&S TSMA6
There are different ways to control measurements on the R&S TSMA6.
● Local operation
To use the R&S TSMA6 as an ordinary PC, an external monitor, mouse and
keyboard have to be connected to the R&S TSMA6.
● Remote access
The remote access to the R&S TSMA6 can be realized via the following
options.
– Using the web GUI of the R&S TSMA6 (see
R&S TSMA6 Web
– Establish a remote desktop connection (via LAN/WLAN) (see
ter 6.1.2, "Establish a Remote Desktop
6.1.1 Start the R&S TSMA6 Web GUI
To start the R&S TSMA6 web GUI via a remote PC, three possible ways are
available.
Getting Started 4900.8040.02 ─ 07
GUI", on page 28).
Configuring the R&S TSMA6
Accessing the R&S TSMA6
Chapter 6.1.1, "Start the
Connection", on page 30).
Chap-
28