Rf Power Scan; Rf Power Scan References; Rf Power Scan Results - R&S TSMA6B User Manual

®
R&S TSMA6B
Results
●
Max. Through
Displays the maximum throughput
●
Ave. Through
Displays the average throughput
●
Last Through
Displays the current throughput
► To stop the scan, use "Stop scan" in the menu inflator in the top right corner.
B.3.6 RF Power Scan
B.3.6.1

RF Power Scan References

To start an RF power scan, the following steps must be performed.
1. Specify the parameters "Start Frequency (in Mhz)" and "End Frequency (in Mhz)"
to define the frequency range of the RF power scan.
The maximum range is from 350 MHz to 4.400 MHz.
Figure B-13: RF Power Scan References
2. Click "Start Test" to start the scan.
B.3.6.2

RF Power Scan Results

The result of the RF power scan is a spectrum of the frequency range set before with
the following axes:
●
x-axis
The x-axis displays the frequency
●
y-axis
The y-axis displays the power level for each frequency (dBm)
User Manual 4901.4026.02 ─ 01
Introduction to Remote ViCom Sample App
Usage
147