Voltage Source (B2985B/B2987B); Staircase Sweep Output - Keysight B2980B Series User Manual

Voltage Source (B2985B/B2987B)

Voltage source on B2985B/B2987B can apply not only a constant voltage but also
a staircase voltage, a list sweep voltage, and a square waveform voltage.

Staircase Sweep Output

Voltage source supports two shapes of staircase sweep output, as shown in
5-4. The B2985B/B2987B can perform the measurement for each sweep step
while the voltage source performs the sweep output, as shown in Figures
5-2
Figure 5-4
Remember the following points when setting the staircase sweep output.
•
•
•
Keysight B2980B User's Guide, Edition 1
and 5-4.
Staircase Sweep Outputs
DC output
Linear Sweep
To set the staircase sweep source, see
(B2985B/B2987B)" on page
To set the ranging mode of the sweep source, see
page 174.
To set the sweep direction and the output condition after sweep, see
Dialog Box" on page
Single Sweep
"Source Function Sub-panel
153.
174.
Function Details
Voltage Source (B2985B/B2987B)
Double Sweep
DC output
"Sweep Dialog Box" on
Figure
Figures
"Sweep
217