Program Key Group - Keysight B2980B Series User Manual

Program Key Group

Press the Program key to display the following softkeys for setting and controlling
the program memory. For details on the program memory, see
on page
The program memory can be defined by using the SCPI commands while the
B2980 is in the remote mode.
Catalog Displays the Program Catalog dialog box which lists the programs saved in the
program memory. This dialog box is also used to specify the memory program to
use. To select a memory program, highlight its name in this list.
View Displays the Program View dialog box which shows the program code of the
specified program.
Variable Displays the Variable dialog box which lists the variables used in the memory
programs. Available index is 1 to 100.
Control Displays the following softkeys for controlling the operation of the program
memory.
The current status can be known by an asterisk (*) on the softkey label.
Run
Pause
Step
Stop
Continue
Keysight B2980B User's Guide, Edition 1
236.
Starts the specified memory program.
Pauses the execution of the memory program.
Starts the step execution of the specified memory program.
Stops the execution of the memory program.
Continues the execution of the memory program presently
paused.
Front Panel Reference
Program Key Group
"Program Memory"
189