Meter View - Keysight B2980B Series User Manual

Front Panel Reference
Display and Assist/Function Keys

Meter View

Displays the measurement results, measurement and source settings, and channel
status. Most setup parameters can be edited on this display. The upper half
displays measurement result(s), and the lower half displays the setup parameters
or condensed graph.
B2981B/B2983B
Display area 1. Latest measurement data
2. NULL (Offset Cancel), ZC (Zero Correction), FILT (Filter), and MATH (Math)
3. The following sub-panel or condensed graph can be displayed.
140
2
1
D1
D2
3
4
D1. Measurement data. Turns orange if the data exceeds the Limit value.
D2. For the limit test, D2 displays PASS or FAIL.
indicators. Examples are shown below.
NULL: If the null (offset cancel) function is effective.
ZC: If the zero correction function is effective.
FILT: If the measurement filter is set.
MATH: If the math function is effective.
You can switch them using Show/Hide XXXX assist keys.
Range setup sub-panel
•
Trigger setup sub-panel
•
Keysight B2980B User's Guide, Edition 1
5