Software And Drivers - Keysight B2980B Series User Manual

Introduction

Software and Drivers

Software and Drivers
This section introduces software and drivers available for Keysight B2980.
•
•
•
•
For the latest system requirements, go to
the information.
48
Keysight Quick IV Measurement Software
PC-based measurement control software. This powerful software makes it easy
to quickly setup and perform I/V measurements and to display the
measurement data in a table or graph without the need to perform any
programming. The software allows you to control up to four B2900 channels
over a GPIB or LAN connection, or one B2900 instrument via a USB
connection.
System requirements:
Windows 10 (32bit/64bit), 8.1 (32bit/64bit)
•
Microsoft .NET framework 4.5.2 or later
•
Keysight IO Libraries Suite 17.0 or later
•
Graphical Web Interface
Web browser based instrument control panel. It enables you to set up and
perform a measurement easily and quickly from a web browser using the
built-in web server. This allows you to control one B2980 over a LAN
connection.
IVI-C or IVI-COM drivers
Compatible with Keysight IO Libraries Suite 17.0 or later. Supports Keysight
VEE, Microsoft Visual Studio (Visual Basic, Visual C, Visual C#), National
Instruments LabWindows and LabVIEW.
LabVIEW driver (VI)
National Instruments LabVIEW 8.5/2010 or later. LabVIEW drivers are
available at NI.COM.
www.keysight.com/find/b2980
Keysight B2980B User's Guide, Edition 1
and get