Front Panel Reference
Display Key Group
Display Key Group
Press the Display key to display the following softkeys for setting the display
functions.
Remote
Enables or disables the front panel display when the B2980 is in the remote mode.
The present setting is displayed on the softkey label. Press the key to switch the
setting.
OFF
ON
Color
Specifies the display color set. The present setting is displayed on the softkey
label. Press the key to switch the setting.
Set 1
Set 2
Zoom
Enables or disables the display zoom. The present setting is displayed on the
softkey label. Press the key to switch the setting.
OFF
ON
In the zoom-in state, the Meter view displays the primary and secondary
measurement data with a large font without the setup parameters.
Digits
Specifies the data display resolution. The present setting is displayed on the
softkey label. Press the key to change the setting.
4
5
6
7
196
Disables the front panel display. Effective for fast operation.
Enables the front panel display.
Sets the color set 1.
Sets the color set 2.
Disables the zoom. Normal display.
Enables the zoom. Only the measured data is displayed.
Zoom-in can be cancelled by pressing the Zoom Out assist key.
Sets 3½ digit resolution.
Sets 4½ digit resolution.
Sets 5½ digit resolution.
Sets 6½ digit resolution.
Keysight B2980B User's Guide, Edition 1