Math Expression; Predefined Math Expressions - Keysight B2980B Series User Manual

Math Expression

B2980 provides a math function for performing calculations using the
measurement result data. The calculation result can be displayed and used for the
limit test and trace statistics.
For the predefined math expressions, see
To define a math expression, see the Keysight B2980 series SCPI Command
Reference. Math expressions can be defined by using the :CALC:MATH
commands. For resources effective for the expression, see
Expressions" on page
To use the math function, see
To display the calculation result, see
Result Dialog Box" on page

Predefined Math Expressions

The following math expressions have already been defined in B2980. The
predefined math expressions are not cleared by the power off and on operations.
•
•
•
•
•
•
•
•
•
•
•
•
Keysight B2980B User's Guide, Edition 1
226.
Scaling and offset (MXPLUSB)
Reciprocal scaling and offset (MRECPXPLUSB)
Ratio calculation (RATIO)
Percentage calculation (PERCENT)
Deviation calculation (DEVIATION)
Percent deviation (PERDIV)
Logarithmic calculation, base 10 (LOG10)
Polynominal calculation (POLYNOMINAL)
Sheet resistivity (SRESISTIVITY)
Volume resistivity (VRESISTIVITY)
Power (POWER)
Offset Compensated Ohms (OFFCOMPOHM)
"Predefined Math Expressions."
"Math Expression Dialog Box" on page
"Graph View" on page 160
185.
Function Details

Math Expression

"Resources Used in the
177.
and "Measure
223