Function Key Group
Press the Function key to display the following softkeys for setting the math, limit
test, and trace functions.
Math
Displays the following softkeys for setting the math function.
Expression
Variable
Limit Test
Displays the following softkeys for setting the limit test function.
Composite
Limits
Trace
Trace function setup. See
Math Expression Dialog Box
This dialog box provides the following parameters for setting the math function. If
the math function is ON, the measurement data can be calculated by using the
specified math expression.
Status
Unit
The available math expressions are listed in the area below the Unit field. Select a
math expression for data calculation from this area. To select a math expression,
highlight the name in this area.
The data calculation is effective for data measured after the math function is set
by this dialog box. The calculation result can be displayed on the dialog box
opened by using the Result key group. See
Math expressions can be defined by using the SCPI commands while the B2980 is
in the remote mode.
Keysight B2980B User's Guide, Edition 1
Math function setup. See
page
177.
Math variable setup. See
page
178.
Limit test operation setup. See
Dialog Box" on page
Limit test data configuration setup. See
Dialog Box" on page
"Trace Buffer Setup Dialog Box" on page
Math function, ON or OFF
Unit for the calculation result of the math expression
Front Panel Reference
"Math Expression Dialog Box" on
"Math Variable Dialog Box" on
"Composite Limit Test Setup
178.
"Limit Test Setup
180.
"Result Key Group" on page
Function Key Group
181.
185.
177