Bnc Configuration Dialog Box - Keysight B2980B Series User Manual

BNC Configuration Dialog Box

This dialog box provides the following parameters for setting the configuration of
the Trigger In and Trigger Out BNC connectors.
Input Polarity
Output Polarity
Output Trigger
Type
Output Trigger
Timing
Output Pulse
Width
For more information about the trigger function, see
page
Keysight B2980B User's Guide, Edition 1
The READ assist key is used to read the value presently set to
the Digital I/O interface.
The WRITE assist key is used to write the specified value to the
Digital I/O interface.
Polarity of the input signal to the Trigger In connector,
POSITIVE (POS., positive) or NEGATIVE (NEG., negative)
Polarity of the output signal from the Trigger Out connector,
POSITIVE (POS., positive) or NEGATIVE (NEG., negative)
Type of output trigger, EDGE (edge) or LEVEL (level)
Timing of the output trigger, AFTER (after action (arm, trigger,
and device action)), BEFORE (before action), or BOTH (both)
Pulse width of the output trigger, 10 s to 10 ms
182.
Front Panel Reference
I/O Key Group
"Trigger Key Group" on
195