System Key Group - Keysight B2980B Series User Manual

System Key Group

Press the System key to display the following softkeys used for several system
setups.
Error Displays the following softkeys to view or clear errors.
Log
Clear
Reset Initializes the B2980.
Press the Reset softkey to display a confirmation dialog box and press one of the
following softkeys to perform the initialization.
To cancel the initialization and close a confirmation dialog box, press the
Cancel/Local key.
Display
H/W
ALL
Cal/Test Displays the following softkeys for performing self-calibration or self-test.
Self-Cal
Self-Test
Press the softkey to display a confirmation dialog box. Press the OK softkey to
start self-calibration or self-test, or the Cancel/Local key to cancel.
PLC Specifies the power line frequency. The present setting is indicated by an asterisk
on the softkey label. Press the key to set up the following.
50 Hz
60 Hz
Auto Detect
Keysight B2980B User's Guide, Edition 1
Displays the Error Log dialog box which displays the SCPI
errors.
Clears the error buffer immediately.
Initializes the display settings.
Initializes the hardware settings.
Initializes all settings.
Performs self-calibration.
Performs self-test.
Specifies the power line frequency 50 Hz.
Specifies the power line frequency 60 Hz.
Checks the AC power line frequency, and then sets the
detected frequency (50 Hz or 60 Hz) to the power line
frequency.
Front Panel Reference
System Key Group
199