[Source:]Memory:voltage:source - Keysight U2722A Programmer's Reference Manual

[SOURce:]MEMory:VOLTage:SOURce

Syntax
[SOURce:]MEMory:VOLTage:SOURce <value>, (@<ch>)
This command stores the VOLTage <value> command into the channel active
memory list.
Parameter
Item Type
NR1
<ch>
NRf
<value>
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Example
MEM:VOLT:SOUR 20, (@1)
See Also
[SOURce:]MEMory:VOLTage:LIMit
[SOURce:]MEMory:VOLTage:MEASure
Keysight U2722A/U2723A Programmer's Reference
Range of values
1 through 3
The maximum value is dependent on the voltage
range set in the memory list
SOURce Subsystem
Defaul t value
Required parameter
Required parameter
9
75