Cist Configuration - Panasonic GA-ML Series Manual

4.4.2.

CIST Configuration

Press C (command) on the Multiple Spanning Tree Configuration menu to display
the screen of the CIST Configuration, as illustrated in the Figure 4-17. The follow-
ing screen configures a basic configuration of CIST.
PNxxxxxx Local Management System
Multiple Spanning Tree Configuration -> CIST Configuration
CIST Root Port:
CIST Root Path Cost:
CIST Root:
CIST Regional Root Cost: 0
CIST Regional Root: 0
CIST Hello Time:
CIST Maximum Age:
CIST Forward Delay: 15
-------------------------------- <COMMAND> -----------------------------------
Set CIST Bridge [P]riority
Set CIST Bridge [H]ello Time
Set CIST Bridge [M]aximum Age
Command>
Enter the character in square brackets to select option
Screen Description
CIST Root Port
CIST Root Path Cost
CIST Root
CIST Regional Root Cost
CIST Regional Root
Time Since Topology Change
Topology Change Count
CIST Hello Time
CIST Maximum Age
CIST Forward Delay
CIST Bridge ID
CIST Bridge Hello Time
CIST Bridge Maximum Age
0 Time Since Topology Change: 0
0 Topology Change Count:
0 000000000000
CIST Bridge ID:
000000000000 CIST Bridge Hello Time:
CIST Bridge Maximum Age:
2 Sec. CIST Bridge Forward Delay: 15
20 Sec. Max Hop Count:
Sec.
Figure 4-17: CIST Configuration
Displays the current route port.
Displays costs covering from a route port to a root bridge.
Displays a bridge ID of a root bridge.
Displays the path cost, which is until a regional route bridge (a
route bridge of CIST tree in the MST region).
Displays a bridge ID (a route bridge of CIST tree in the MST
region) of a regional route bridge.
Displays the time elapsed (seconds), which is calculated after
changing the configuration of a spanning tree.
Displays the number of times that configuration of a spanning
tree is changed.
Displays the access interval with a route bridge to check a span-
ning tree configuration.
Displays the time for time-out of Hello Messages.
Displays the transition time of a spanning tree condition (e.g.
from "Listening" to "Learning", or from "Learning" to "For-
warding").
Displays a bridge ID of this device, and it consists of a bridge prior-
ity and a MAC address. When shipping from a factory, the bridge
priority is configured to "0000 000000000000".
Displays Hello Time when this device becomes a route bridge.
Displays Maximum Age when this device becomes a route bridge.
95
0 000000000000
20
20
Set CIST Bridge [F]orward Delay
Set MSTP Max H[o]p Count
[Q]uit to previous menu
Sec.
0
2 Sec.
Sec.
Sec.