Table of Contents
Advertisement
3.6.2.
MAC Learning Menu
Press A (command) on the Forwarding Database Menu, and then you can see the
MAC Learning Menu as Figure 3-17. You can configure the learning mode for MAC
address per Port, on this screen.
PNxxxxxx Local Management System
Forwarding Database Menu -> MAC Learning Menu
Port
MAC Learning
------ ------------
1
Auto
2
Auto
3
Auto
4
Auto
5
Auto
6
Auto
7
Auto
8
Auto
9
Auto
10
Auto
11
Auto
12
Auto
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Command>
Enter the character in square brackets to select option
Screen Description
Port
Displays the port-number.
MAC Learning
Displays the method for learning MAC address. The factory default settings is
"Auto".
Auto
Disabled
MAC Learning
Displays the limit value of the number of auto-learnings for a MAC address per
Limit
port.
Disabled
From 1 to 256
-------------------------------------------------------------------------------------------------------------------------------------------
Note: If the auto learning for MAC address becomes disabled, the communication
does not work unless the MAC address is registered statically.
-------------------------------------------------------------------------------------------------------------------------------------------
[S]et MAC Learning Mode
[Q]uit to previous menu
Figure 3-17: MAC Learning Menu
A MAC address is learned automatically, and then packets are
transferred.
The auto-learning of MAC address is disabled, and packets are
not transferred if the MAC address is not registered statically.
Does not limit the number of auto-learnings for a MAC address
(factory default settings).
Displays the limit value of the number of auto-learnings for a
MAC address.
51
Advertisement
Table of Contents
