Hybrid Vlan Configuration Menu - Panasonic GA-ML Series Manual

4.1.5.

Hybrid VLAN Configuration Menu

Press H (command) on the VLAN Management menu, and then you can see Hybrid
VLAN Configuration Menu as Figure 4-6. You can configure the Hybrid VLAN per
port on this screen.
PNxxxxxx Local Management System
VLAN Management -> Hybrid VLAN Configuration Menu
Port PVID VLANs
---- ---- ------------------------------------------ ---------- --------
1 1
2 1
3 1
4 1
5 1
6 1
7 1
8 1
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Port Displays the port-number.
PVID Displays the PVID(Port VLAN ID) that is configured on the port, currently.
The PVID displays (or means) where (what kind of VLAN IDs) to send untagged
packets when receiving untag packets. PVID is set to 1 when shipping from a fac-
tory. Refer to a tag regardless of this value and determine the destination port
when receiving packets with a tag.
Acceptable Displays the frame type to receive.
Frame Type
Tagged
Only
Untagged
Admit All
GVRP Displays the GVRP condition.
Disabled
Enabled
1
1
1
1
1
1
1
1
[A]dd Allowed VLAN
Set [G]VRP Status
Set [F]rame Type
Figure 4-6: Hybrid VLAN Configuration Menu
Ignores (or deletes) packets without tags and packets with a priority
tag.
Ignores (or deletes) packets with VLAN tags (excluding packets with
a priority tag)
Deletes packets without tags or packets with a priority tag.
Disabling GVRP (factory default settings).
Enabling GVRP
Frame Type
Admit All
Admit All
Admit All
Admit All
Admit All
Admit All
Admit All
Admit All
[R]emove Allowed VLAN
Set port [V]ID
78
GVRP
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled