Multiple Spanning Tree Configuration - Panasonic GA-ML Series Manual

4.4.1.

Multiple Spanning Tree Configuration

Press S (command) on the Advanced Switch Configuration menu, and then
you can see "Multiple Spanning Tree Configuration" as Figure 4-13 A.
This device supports three versions: a multiple spanning tree protocol that
is compliant with IEEE802.1s (MSTP: Figure 4-13B), a rapid spanning tree
protocol compatible with IEEE802.1w, (RSTP: Figure 4-13C), and a span-
ning tree protocol compatible with IEEE802.1D (STP: Figure 4-13 D).
PNxxxxxx Local Management System
Advanced Switch Configuration -> Multiple Spanning Tree Configuration
Global MSTP Status: Disabled
Global Protocol Version
Global MST Configuration Name
Global MST Revision Level
Global MST Config Digest
-------------------------------- <COMMAND> -----------------------------------
[E]nable/Disable Global MSTP
Set MSTP Protocol [V]ersion
Set MSTI Configuration [N]ame
Set MSTI [R]evision Level
CIST [C]onfiguration
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Figure 4-13 A: Multiple Spanning Tree Configuration
: RSTP
:
: 0
: 00000000000000000000000000000000
CIST [B]asic Port Configuration
CIST [A]dvanced Port Configuration
MSTP Ins[t]ance Configuration
Designated Topology [I]nformation
Re[g]ional Topology Information
91