Arp Table - Panasonic GA-ML Series Manual

3.8. ARP Table

Press R (command) on the Basic Switch Configuration menu to display the ARP
Table screen, as illustrated in the Figure 3-24. You can see and configure ARP table
on this screen.
PNxxxxxx Local Management System
Basic Switch Configuration -> ARP Table
ARP Age Timeout : 240 seconds
IP Address
------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set ARP Age [T]imeout
Command>
Enter the character in square brackets to select option
Screen Description
ARP Age Timeout
IP Address
Hardware Address
Type
Hardware Address Type
------------------ ------
[A]dd/Modify Static Entry
[D]elete Entry
[Q]uit to previous menu
Figure 3-24: ARP Table
Displays an aging time out of ARP table.
Displays the IP address on the ARP table.
Displays the MAC address on a ARP table.
Displays types of ARP entries registered.
Static Displays that a manual configuration is done.
Dynamic Displays that automatic learning is done.
61