Panasonic GA-ML Series Manual page 123

The following describes commands to be used on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P (command) to display the previous page.
M Configures the static multi-cast group.
1. Press M (command), and then the appearance of the command prompt becomes
"Add/Delete Multicast Router Port settings(A/D) >". After that, the appearance of the
command prompt becomes "Set VLAN ID(1-4094)>". Enter the VLAN ID, and then the
appearance of the command prompt becomes "Set Port configuration(S/F) >". Press S to
set to Static port, and F to set to forbidden port. the appearance of the command prompt
becomes "Select port-number to be changed>". Enter the port-number.
Q Returns to the top menu.
123