Static Address Table - Panasonic GA-ML Series Manual

3.6.1.

Static Address Table

Press S (command) on the Forwarding Database menu, and then you can see Static
Address Table Menu as Figure 3-16. You can add or delete a MAC address stati-
cally, on this screen.
PNxxxxxx Local Management System
Forwarding Database Menu -> Static Address Table Menu
MAC Address
-----------------
DataBase is empty!
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[A]dd New Entry
Command>
Enter the character in square brackets to select option
Screen Descriptiona
MAC Address
Port
VLAN ID
The following describes commands to be used on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P (command) to display the previous page.
A Registers a MAC address, additionally.
Enter A (command), and then the appearance of the command prompt becomes "Enter MAC
Address(xx:xx:xx:xx:xx:xx)". Enter the address to add.
D Deletes a MAC address registered.
Enter D (command), and then the appearance of the command prompt becomes "Enter MAC
Address(xx:xx:xx:xx:xx:xx)". Enter the address to delete.
Q Returns to the top menu.
Port VLAN ID
------ -------
Figure 3-16: Static Address Table
Displays a MAC address in the MAC address table.
Displays the port that a MAC address belongs to.
Displays the VLAN ID that a MAC address belongs to.
[D]elete Entry
[Q]uit to previous menu
50